4
Getting to know Your Speaker Package
A
Speaker terminals
These push terminals
are for connecting the
speaker to your AV
Receiver, amp, or
other receiver with the
supplied speaker
cables. The supplied
speaker cables are
color-coded for easy
identification. Simply
connect each cable to
the same-colored posi-
tive speaker terminal.
B
Speaker mount/bracket inserts
These threaded inserts can be used to attach the
speaker to a speaker mount or bracket.
Note:
Use commercially available 1/4" screws to attach
the speaker to a speaker mount or bracket.
C
Keyhole slots
These keyhole slots can be used to wall-mount the
speaker.
Use the center speaker base to mount the center speaker
horizontally. If you place the speaker and its base on top
of a TV or an entertainment center, adjust the angle of
the speaker so that it faces toward the listening position.
The center speaker should be installed on the base
securely. If the speaker is loose, try adjusting the posi-
tion so that it sits securely on the base.
The cradle surface of the base features two stoppers to
prevent the speaker from moving. Therefore, you can
tilt the speaker toward the front by up to 15 degrees.
■
Using the included rubber spacers
We recommend using the
supplied rubber spacers to
achieve the best possible
sound from your speak-
ers. The rubber spacers
prevent the speakers from
moving, providing a more
stable setup.
The speakers can easily be wall mounted by using the
keyhole slots. To prevent the speaker from vibrating
against the wall, attach four of the supplied rubber spac-
ers to the rear of each speaker.
■
Mounting vertically
To mount the speakers vertically, use the one keyhole
slot shown to hang each speaker on the screw that is
securely screwed into the wall.
■
Mounting horizontally
To mount the speakers horizontally, use the two keyhole
slots shown to hang each speaker on two screws that are
securely screwed into the wall.
The plaque of each speaker rotates so that you can posi-
tion the speakers upside down.
Caution:
A mounting screw’s ability to support a speaker
depends on how well it’s anchored to the wall. If you
have hollow walls, screw each mounting screw into a
stud. If there are no studs, or the walls are solid, use
suitable wall anchors.
Use screws with a head diameter of 3/8" or less and a
shank diameter of 1/8" or less. With hollow walls, use a
cable/pipe detector to check for any power cables or
water pipes before making any holes.
Leave a gap of 1/4"–5/16"
between the wall and the
base of the screw head, as
shown.
(We recommend that you
consult a home installation
professional.)
Front, Center & Surround speakers
(SKF-640F, SKC-640C, SKM-640S)
Center Speaker Base
3
1
2
Rear Panel
15˚
SKC-640C
Base for horizontal
mounting
Stoppers
Rubber spacer
Bottom of
the bass
Wall Mounting
Rubber spacer
Keyhole slot for
wall mounting
Keyhole slot for wall
mounting
Rubber spacers
Wall
1/4"–5/16"
HTP-640̲En.fm 4 ページ 2006年6月22日 木曜日 午前11時9分