86
Zone 2
—Continued
Note:
• To control Zone 2, you must press the remote control-
ler’s [ZONE 2] button first.
Adjusting the Volume of Zones
Muting Zones
On the remote controller, press
the [ZONE 2] REMOTE MODE
button, and then use the VOL
[
]/[
] button.
On the AV receiver, use the ZONE
2 LEVEL [
]/[
] buttons.
If your Zone 2 speakers are connected
to an amp in Zone 2, use its volume
control to adjust the volume.
On the remote controller, press
the [ZONE 2] REMOTE MODE
button, and then press the [MUT-
ING] button.
To unmute a zone, on the remote
controller, press the [ZONE 2]
REMOTE MODE button, and then
press the [MUTING] button again.
Remote
controller
AV receiver/
HT-S7100̲En.book Page 86 Friday, July 11, 2008 10:36 AM
