75
≫
≫
≫
≫
≫
≫
Setting Item
Default Value
Setting Details
Surround
150 Hz
Select the crossover frequency from "40 Hz" to
"200 Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
•
"Full Band" can be selected only when "Front" is
set to "Full Band".
• If the item cannot be selected even though
connection is correct, check if the setting in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
LPF of LFE
120 Hz
Set the low-pass filter for LFE (low-frequency
effect) signals in order to pass only the lower
frequency signals than the set value, and thus
cancel unwanted noises. The low-pass filter is
effective only on sources with LFE channel.
The value from "80 Hz" to "120 Hz" can be set.
"Off": When this function is not used
Double Bass
On
This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Full Band".
Bass output is boosted by feeding bass sounds
from the front right and left, and center speakers to
the subwoofer.
"On": Bass output is boosted.
"Off": Bass output is not boosted.
3. Distance
Set the distance from each speaker to the listening position.
Setting Item
Default Value
Setting Details
Front Left
3.60 m
Specify the distance between each speaker and
the listening position.
Center
3.60 m
Specify the distance between each speaker and
the listening position.
Front Right
3.60 m
Specify the distance between each speaker and
the listening position.
Height Left
2.70 m
Specify the distance between each speaker and
the listening position.
Height Right
2.70 m
Specify the distance between each speaker and
the listening position.
Surround Right
2.10 m
Specify the distance between each speaker and
the listening position.
Surround Left
2.10 m
Specify the distance between each speaker and
the listening position.
Subwoofer
3.60 m
Specify the distance between each speaker and
the listening position.
•
The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
