41
En
You can reset a
REMOTE MODE
to its default remote
control code.
You can reset the remote controller to its default settings.
By pressing
REMOTE MODE
that’s been programmed
with the remote control code for your component, you can
control Onkyo component as below.
For details on entering a remote control code for a
different component (
➔
page 40
).
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player
BD/DVD
is preprogrammed with the remote control code
for controlling a component that supports the
p
*1
.
The component must be able to receive remote control
commands via
p
and be connected to the AV
receiver via HDMI.
Use the following remote control codes:
`
32910/33001/31612
:
Onkyo Blu-ray Disc/DVD player with
p
*1
The
p
supported by the AV receiver is the CEC
system control function of the HDMI standard.
Resetting REMOTE MODE Buttons
1
While holding down
REMOTE MODE
that you
want to reset, press and hold down
HOME
until the
remote indicator lights (about 3 seconds).
2
Within 30 seconds, press
REMOTE MODE
again.
The remote indicator flashes twice, indicating that the
button has been reset.
Each of
REMOTE MODE
is preprogrammed with a
remote control code. When a button is reset, its
preprogrammed code is restored.
Resetting the Remote Controller
1
While holding down
RECEIVER
, press and hold
down
HOME
until the remote indicator lights
(about 3 seconds).
2
Within 30 seconds, press
RECEIVER
again.
The remote indicator flashes twice, indicating that the
remote controller has been reset.
Controlling Other Components
