background image

64

 

Specifications

 

Settings

 

Listening Modes

 

Playback Function

 

Basic Manual

Troubleshooting

|

Appendix

LINKS

Reference Information

Radio Wave Caution

This unit uses radio waves in the 2.4 GHz and 5 GHz 

frequency bands. 

There are nations and regions where the use of particular 

5 GHz bands are prohibited outdoors, so do not use this 

unit outside in those places.

2.4 GHz radio waves are used by a variety of devices, as 

shown in lists 1 and 2 below.

1. Devices which use a 2.4 GHz radio wave frequency

Cordless phones

Cordless facsimiles

Microwave ovens

Wireless LAN devices (IEEE802.11b/g/n)

Wireless AV equipment

Wireless controllers for game systems

Microwave oven-based health aids

Video transmitter

Specific type of external monitor and LCD display

2. Less common devices which use a 2.4 GHz radio wave

frequency

Anti-theft systems

Amateur radio stations (HAM)

Warehouse logistic management systems

Discrimination systems for train or emergency

vehicles

If these devices and the AV receiver are used at the same 

time, the audio may be undesirably stopped or disturbed 

due to a radio wave interference.

Suggestions for improvement

Switch off the devices which emit the radio wave.

Place the interfering devices away from the AV

receiver.

The AV receiver uses radio wave, and a third person

can receive the wave on purpose or accidentally. Do not

use the communication for important or fatal matters.

We assume no responsibility whatsoever for any error

or damage of network environment or access device

resulting from the use of this apparatus.

Confirm with the provider or access device maker for

more information.

Scope of Operation

Use of the AV receiver is limited to home use. 

(Transmission distances may be reduced depending on 

communication environment.)

In the following locations, poor condition or inability to 

receive radio waves may cause the audio to be interrupted 

or stopped:

In reinforced concrete buildings or steel framed or iron

framed buildings.

Near large metallic furniture.

In a crowd of people or near a building or obstacle.

In a location exposed to the magnetic field, static

electricity or radio wave interference from radio

communication equipment using the same frequency

band (2.4 GHz) as the AV receiver, such as a 2.4 GHz

wireless LAN device (IEEE802.11b/g/n) or microwave

oven.

If you live in a heavily populated residential area

(apartment, townhouse, etc.) and if your neighbor's

microwave oven is placed near your AV receiver, you

may experience radio wave interference. If this occurs,

move your AV receiver to a different place.

When the microwave oven is not in use, there will be no

radio wave interference.

Summary of Contents for HT-R695



























































































Reviews: