![background image](http://html.mh-extra.com/html/onkyo/gr-ps100/gr-ps100_instruction-manual_1638113007.webp)
7
En
Attaching procedure
1. First attach the angled rod to the speaker.
Tighten the screws for attaching the speaker
firmly. Also, if the lock handle is loose, tighten
it again.
2. Put the clamp over the table, shelf, or pole,
then turn the clamp handle until the clamp is
fixed and does not move. When fitting to a
shelf, push the clamp as far onto the shelf as
possible.
3. Put the angled rod with speaker attached into
the clamp.
When doing so, insert so that the end of the
angled rod extends at least 10 mm (3/8")
through the clamp.
4. After adjusting the angled rod you have
inserted so the flat part contacts the end of
the screw of the dial for fixing the rod, turn the
dial for fixing the rod to fix the angled rod in
place.
0
The screws and handle may become loose
after fitting. Be sure to retighten them if this
occurs.
1
2
3
4
10 mm
or above
10 mm or above
SN29403452_GR-PS100_JaEn_1802XX.book 7 ページ 2018年2月19日 月曜日 午後2時41分