background image

 

7

 

Playing CDs

DX-7222

POWER

PAUSE

PLAY

OPEN/CLOSE

STOP

REMOTE CONTROLLER          RC-402C

PEAK SEARCH

+10

0

TIME EDIT

CLEAR

MEMORY

REPEAT

DISPLAY

7

8

4

5

1

2

9

6

3

NEXT

SELECTION

A

B

SHUFFLE

,

,

Disc tray

 

1. Press the POWER button to turn on the power.

2. Press the   OPEN/CLOSE button.

3. Put the disc in the disc tray, with the label side of the disc

facing up.

4. Press the   OPEN/CLOSE button. 

5. Press the 

 

 

 

PLAY button.

 

The CD player will play the first track (track 1).
* If you want to, you can skip step 4 by pressing the 

 PLAY

button instead of the

 

   

 

OPEN/CLOSE button. The disc tray

will close automatically and play track 1.

If the CD player does not start playing when the 

 PLAY button

is pressed:

 

 

The disc may be upside down in the tray. Press the

 

   

 

OPEN/

CLOSE button to open the disc tray. If you cannot read the label
on the disc, turn the disc over.

 

 

Moisture may have formed inside the CD player. Remove the
disc from the disc tray and leave the power on for about one
hour to evaporate the moisture.

 

Using the timer for play

 

The CD player starts playing the loaded CD automatically as soon
as power is supplied. Using this feature, you can enjoy timer play
using your audio timer. For instructions on how to set the timer, see
the instruction manual supplied with the timer.

 

 

Before starting play after you have inserted a disc

 

The total number of tracks on the disc
All of the track numbers on the disc (When the number of
tracks exceeds 20, the OVER indicator lights.)
The total playing time of the disc

 

 

After starting play

 

The track number currently being played
The next track number
The elapsed time of the current track
The display can be changed by pressing the DISPLAY button.

Press the 

 STOP button.

Press the 

 PAUSE button.

The PAUSE indicator will light.
To resume play, press the 

 PLAY button or the 

 PAUSE but-

ton. The PAUSE indicator will turn off.

 

Normal play

Contents of the display

Stopping play

Stopping play temporarily

a
b

c

d
e

f

TOTAL REMAIN

T R A C K

T R A C K

D I S C

1

2

3

4

5

6

7

8

9

10

11

12

OVER

1

2

3

4

5

Remote controller

Label side

Remote controller

SINGLE ELAPSED

T R A C K

T R A C K

N E X T

N E X T

D I S C

1

2

3

4

5

6

7

8

9

10

11

12

Remote controller

Remote controller

PAUSE

Remote controller

Summary of Contents for DX-7222

















Reviews: