DV-SP800
UPGRADE FIRMWARE-9
TV Monitor
Setting the ID number.
2. Press the
SEARCH
button.
TV Monitor
FL display
If the writing of ID data to a flash
ROM is completed, it will be
displayed as "
Rom Write OK
! "
ID data setting
1. Press the
open/close
button of the unit and the
tray is pulled out.
2. Load the ID data disc.
3. Press the
open/close
button and tray is closed.
It becomes such a display
during reading of data from
CDR.
The read-in work of ID data from
CDR starts automatically.
If reading completes ID data
from CDR, next, the writing
of ID data to the flash ROM
of a set will start.
4. Check being displayed as "
Rom Write OK"
1. Input the ID number recorded before using the number button. (Refer to "
Check ID number"
)
6.
Put out the disc.
7.
Check the ID number.
If ID number is set up, it will
be in ID data input state from CDR.
FL display
8.
Check the Firmware.
Number key
1,2 - - - 8,9,0
5.
Press the
CLEAR
button of remote controller and setting mode is ended.
[Player's ID Number Setting]
ID Number?
> 0 0 0 0 0 0 0 0 1 OK?
<PLAY> Complata Mode
<SEARCH> Enter
Input ID Number !
[Player's ID Number Setting]
<CLEAR> Exit
Insert the ID Disc !
IN ID DATA
SEARCH
5
[Player's ID Number Setting]
Loading The ID data Disc !
[Player's ID Number Setting]
Loading The ID data Disc !
[Player's ID Number Setting]
Rom Write OK !
<CLEAR> Exit
RD ID DATA
WR ID DATA
ID DATA OK
CLEAR
Summary of Contents for DV-SP800
Page 51: ...C1903 side pattern de pattern ...