26
Connecting the Power/Turning on the DVD receiver
Before connecting
• Make sure that all the connections from pages 17 to 25 are
complete (the connection to the TV is required).
• Turning on the DVD receiver may cause a momentary power
surge, which might interfere with other electrical equipment such
as computers. If this happens, use a wall outlet on a different
circuit.
• The DR-L30 is shipped with the POWER in the ON position
(
_
ON). When the power cord is plugged in for the first time, the
DR-L30 will automatically turn on.
1
Connect the power cord to a wall outlet.
2
Press POWER on the DVD receiver turn on the
DVD receiver.
3
The display on the DVD receiver’s front panel
light.
• To put the DVD receiver in the standby mode, press
STANDBY/ON on the remote controller. Be sure to set the
volume to minimum before putting the DVD receiver in the
standby mode for the next use to avoid sudden loud sound
reproduction.
• While in the STANDBY mode, the DVD receiver can
receive signals from the remote controller.
Setting the STANDBY/ON button on the remote controller to
set the DVD receiver to standby does not turn off the power
completely.
■
Turning on the subwoofer (SKW-L30)
1
Connect the power cord to a wall outlet.
2
Press POWER to the ON position.
The indicator changes from red to green when the subwoofer
receives a signal.
POWER
STANDBY/ON
STANDBY indicator
To wall outlet
OUTPUT
LEVEL
LINE
INPUT
MIN
MAX
POWERED SUBWOOFER
MODEL NO.
SKW-L
30
POWER
ON
OFF
POWER
To wall outlet
STANDBY/ON
indicator
EN00_L-MS30.book Page 26 Tuesday, September 2, 2003 4:19 PM
