Onkyo DR-C500, Service Manual

Page: 5 / 56

DR-C500
1 3 6 5
9
2 4
8 7 10
Y
P
B
P R
COMPONENT VIDEO
L
R
R
L
R
L
R
L
IN IN IN IN OUT OUT
VIDEO 1 VIDEO 2
PRE OUT COAXIAL OPTICAL OPTICAL IN OUT
MONI
OUT
VIDEO 2 VIDEO 1
IN IN OUT
DIGITAL
OUT
SUB
WOOFER
DIGITAL IN
VIDEO 2 VIDEO 1 TAPE /CD-R TV/LINE
AUDIO
FRONT
SPEAKERS
A
B
SURROUND
SPEAKERS
CENTER
SPEAKER
VIDEO
S VIDEO
MODEL NO.
DR-C 500
DVD CHANGER RECEIVER
REGIONAL CODE
1
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
ANTENNA ANTENNA
FRONT SPEAKERS A/B, SURROUND SPEAKERS and
CENTER SPEAKER terminals
FRONT SPEAKERS: system: To enjoy home theater sound.
Speaker terminals are provided for the front left, front right, center,
surround left and surround right speakers.
FRONT SPEAKERS: system: To enjoy stereo sound. Speaker
terminals are provided for the front left and front right.
AUDIO (TV/LINE IN / TAPE/CD-R IN/OUT /
VIDEO 1 IN/OUT / VIDEO 2 IN) jacks
These are the analog audio inputs and outputs. There are 4 audio
inputs and 2 audio outputs. The audio inputs and outputs require
RCA type connectors.
When connecting a VCR or other video component, make sure you
connect the audio and video leads to the same set of jacks (i.e.,
both to VIDEO 1).
ANTENNA terminals
These terminals are for connecting the FM antenna and AM
antenna.
VIDEO (VIDEO 1 IN/OUT / VIDEO 2 IN) jacks
There are 2 video inputs and 1 output. Connect LD players, VCRs
or other video components to the video inputs. The video output
channel can be used to be connected to a video tape recorder for
making recordings.
MONI OUT jacks
The monitor output includes both RCA type and S video
configurations. This output is for connecting a television monitor or
projector.
COMPONENT VIDEO IN/OUT jacks
If your TV has component inputs, you can connect a component
video cable to the component input of your TV and to the
COMPONENT VIDEO OUT jack of your DVD Changer Receiver for
ideal video quality.
a DVD player or other device has component video out jacks,
If you can directly input a component signal to the COMPONENT
VIDEO IN jack.
The component video cable only carries the video signal;
remember to connect the left and right audio cables.
If you connect a TV that is compatible with a Progressive scan
signal, you can enjoy both Interlaced and Progressive scan.
SUB WOOFER PRE OUT jack [16]
This terminal is for connecting an active subwoofer.
DIGITAL IN (VIDEO 1 OPTICAL, VIDEO 2 COAXIAL) jacks
These are the digital audio inputs. There is 1 digital input with an
optical jack and 1 with a coaxial jack. The inputs accept digital
audio signals from MD players, hard disk recorders, CD players,
or other digital source component.
DIGITAL OUT (OPTICAL) jack
This jack is for connecting an MD recorder, CD recorder, hard disk
recorder or other component with optical fiber cable.
S VIDEO (VIDEO 1 IN/OUT / VIDEO 2 IN) jacks
There are 2 S Video inputs and 1 output. Connect LD players,
VCRs or other video components to the video inputs. The S Video
output channel can be used to be connected to video tape recorder
for making recordings. The S-Video cable only carries the video
signal. Remember to connect the left and right audio cables.
1
3
6
5
2
4
9
8
7
10
PANEL VIEWS-3
REAR PANEL