![background image](http://html1.mh-extra.com/html/onkyo/c-705tx/c-705tx_instruction-manual_1636672005.webp)
5
Befor
e Using
Connections
Other Information
Operations
For U.S. model
The laser is covered by a housing which prevents
exposure during operation or maintenance. How-
ever, this product is classified as a Laser Product
by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and
Drug Administration. According to their regula-
tions 21 CFR section 1002.30, all manufactures
who sell Laser Products must maintain records of
written communications between the manufac-
turer, dealers and customers concerning radiation
safety. If you have any complaints about instruc-
tions or explanations affecting the use of this prod-
uct, please feel free to write to the address on the
back page of this manual. When you write us,
please include the model number and serial num-
ber of your unit.
In compliance with Federal Regulations, the certi-
fication, identification and the period of manu-
facture are indicated on the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on,
the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.