12
Preparations
a
Analog Audio Cable
Connect your pre-amplifier and you can use this unit as a
power amplifier. Connect the MAIN IN jacks of the unit and
the PRE OUT jacks of the pre-amplifier with an analog audio
cable.
0
Do not connect a source device (CD device, etc.) to the
MAIN IN jack. Doing so may produce high-volume sound
that can damage the unit, speakers, and various other
devices.
Setup
: Switch the unit to power amplifier mode to use this
unit as a power amplifier. (
p19)
a
Power Cord
This model includes a removable power cord. The power
cord must be connected only after all other connections are
completed. Make sure you first connect the power cord to
AC INLET terminal of the unit and then connect to the outlet.
Always disconnect the outlet side first when disconnecting
the power cord.
Using this unit as a power amplifier
a
Pre-amplifier
Power Cord Hookup
a
SN29403409_A-9130_En_1806XX.book 12 ページ ２０１８年７月１２日 木曜日 午後８時４５分
