24
En
You can adjust the bass, treble and left/right output
balance respectively.
■
Operating on the integrated amplifier
Tip
• By default, bass, treble and balance is set to the center position.
Note
• While the Direct function is enabled, bass and treble are
disabled.
You can temporarily mute the output of the integrated
amplifier.
Note
• While the integrated amplifier is muted:
– Adjusting the volume or setting the integrated amplifier to
Standby will unmute the integrated amplifier.
Note
• Always turn down the volume before connecting your
headphones.
• When headphones are connected, the
SPEAKERS
button
cannot be used.
Adjusting the Bass, Treble and Balance
1
Turn the
BASS –/+
,
TREBLE –/+
and
BALANCE
L/R
knobs.
BASS
–
/
+
TREBLE
–
/
+
BALANCE
L
/
R
Muting the Sound
1
Press
MUTING
.
The SPEAKERS (A/B) and SELECTOR LEDs blink.
To unmute the integrated amplifier, press
MUTING
again.
Using Headphones
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the
PHONES
jack.
When connecting the headphones, the
SPEAKERS
(A/B)
LEDs go off.
You can adjust the volume and mute the sound, by
using
VOLUME
q
/
w
.
While headphones are connected, no sound is output
from the speakers and PRE OUT jacks.
MUTING
PHONES
jack
