background image

Section 6—Proper Care and Feeding 

 

Your Rocket UFW series subwoofer does not 
need much exterior maintenance other than an 

occasional dusting.  Please use care with the 
gloss black ends and treat them as you would a 

piano finish.  They can be waxed with automo-
tive carnauba wax if desired.  We recommend 

the 3M Yellow Detail Cloth (part # 39016) for 
dust removal as it will not scratch the black sur-
face.  The durable matte finish on the wood ve-

neer requires only some dusting, or can be wiped 
off with a water dampened soft cloth. 

 
Above all, listen and enjoy! 

 

6.1 Warranty Policy and Terms 

 
All AV123 products carry a limited manufac-
turer’s parts and labor warranty.  All UFW series 

subwoofers are guaranteed to be free from 
manufacturer’s defects for a period of one year 

from the date of purchase. 
 

Get and extra two years of warranty cover-
age free!
 

 
When you register your product online at 
www.av123.com, we will extend the warranty an 

additional two years on the cabinet and driver, 
and an additional 1 year on the amplifier and 

electronics.  This extended warranty is free sim-
ply by registering within 60 days of your pur-

chase.  We urge you to take advantage of this 
offer. 

 
Warranties apply to the original owner and are 
non-transferable.  AV123 will exchange all defec-

tive merchandise, including shipping charges, to 
the original shipment destination, at no charge 

for up to 60 days after the date of purchase.  
After 60 days the product must be returned to 

AV123 for repair only and return shipping costs 
are the responsibility of the customer.  All ques-

tions should be directed to customer service. 
 

6.2 Stay in Touch 

 

Remember that personalized tech support is only 

a phone call away.  Call USA toll-free 
877.543.7500 or worldwide at 303.543.7500.  

Whether you need technical assistance, have a 
suggestion to make your UFW-12 even better, or  

simply want to let us know how much you enjoy 
your new subwoofer, please feel free to contact 
us at any time!   

For the latest information on the entire Rocket 

line or to register your product, please visit us 
online at www.av123.com 

 

6.3 UFW-12 Specifications 

 

Type: Acoustic suspension, single-driver system  

Driver: 12" multi-layer Kevlar composite woofer  
Frequency Response: 20 Hz—220Hz +/- 3 dB 

Amplifier: 1000 watts 
Size (W x D x H):
 19.75" x 20.75" x 21.5"  
Weight: 137 lbs.  

Finish: Real wood or painted w/ piano-black lac-
quer end caps  

Other Features:  

• 

One-band parametric EQ (freq, bandwidth, 
and level),  

• 

Phase adjustment, gain, and crossover ad-
justments (30Hz - 200Hz) 

• 

LFE and R/L RCA input 

• 

Auto-on / standby mode 

 

6.4 Miscellaneous Information 

 

Figure 6.1 below shows the correction values for 
the SPL meter mentioned earlier in this manual.  

For any number read (left column) from this me-
ter, it is necessary to add the correction value 
(right column) before plotting actual results. 

 
 

 
 

 
 

  

 

 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 

Thank you for supporting AV123 

 

RS SPL Reading 

(dB)  

Add (dB) 

20 

+7.5 

25 

+5 

32 

+3 

40 

+2.5 

50 

+1.5 

63 

+1.5 

80 

+1.5 

100 

+2 

Figure 6.1 

rev1_sp_1005 

Summary of Contents for Rocket UFW-12













Reviews: