Onix NS-900C, Instruction Manual, Page: 4 / 8

3
Operation:
1. Place the heater on a firm level surface free from obstructions and at least 3 feet
away from any wall or combustible materials.
2. With the selector knob in the OFF position , plug the heater into the mains supply.
3. Turn the control knob to either (1) for 450 Watt or (2) for 900 Watt.
4. Turn the control knob fully to the position to activate the oscillation feature.
5. Turn the selector knob to the OFF position and unplug the unit when you have
finished using it.
Other Features:
This heater is equipped with a safety tilt switch which automatically shuts off the heater
element if the heater is not in the upright position, the heater will resume back to normal
when the heater is returned to the upright position.
If your heater fails to operate:
1. Be sure that the unit is plugged into the power supply and that the electrical outlet is
in working order.
2. Check for obstructions.
3.
If you find any obstruction, turn the heater OFF, unplug the unit from the power
supply and wait for it to cool down, carefully remove the obstruction, plug the
heater back into the power supply and restart the unit as described in
the OPERATIONS guide.
4. If the defect persists, remove the plug from the power point and consult an
authorized electrical company.