•
Settings
: In this section you can select the functions of the M35.
A)
Network:
M35 can connect to a wireless network or to Eternet.
a1)
Network setup
: choose the network to be used , whether wired or wireless
a2)
Network info
:
info related to connection
a3)
Default upnp server
:
to select the server to connect to
B)
Time
b1)
Time zone
:
it allows to select a specific time zone.
b2)
daylight saving
: DST ON or OFF.
b3)
show clock:
The display shows date and time.
C)
User interface
c1)
Language
:
select and change the language.
c2)
Themes
: There are 4 different backgrounds.
c3)
display timeout
: it turns the display off after a period of time (varying from 10 seconds to an hour).
To reactivate the display, press any key.
D) Playback
d1)
Repeat
• OFF:
when OFF is selected, no reproduction occurs
• ALL:
when ALL is selected, the repetition of the entire selected folder takes place
• ONE:
If you select the ONE button, the repetition of the selected one file takes place
d2) Shuffle
• OFF:
if you select the OFF button, the random reading is turned off
• SONGS:
when you select SONGS, track reading operates randomly throughout all the folders
• ALBUMS:
if you select the button ALBUM, the reading is done randomly within a single album
d3) Slideshow:
Possibility to adjust the display time of information related to each file, from minimum of 5
secs to 60 secs max.
E) General
e1) Reset settings:
selecting this item, the factory settings will restore.
e2) Software Update:
selecting this function, the M35 will be searching for new software updates if available.
e3) Info:
information upon the hardware and software version.
e4) Legal:
notes and recordings.
Use of M35 in DAC function for USB – PC
To use the M35 as a DAC, it is necessary to install the USB drivers for X-MOS present in the original packaging or
download them from the website www.onix-hifi.com. The USB connector type B is located on the rear panel of the unit.
Use of M35 in DAC function for USB Type A (Front / Rear Panel)
This input normally accepts Pen drive memories or hard disk drive if selfempowered. By Inserting a hard drive with no
self power supply, the product is not able to read the contents. The maximum output voltage of USB is 5V/1A.
4