![background image](http://html.mh-extra.com/html/onix/jll-0701e/jll-0701e_instruction-manual_1636234004.webp)
Assembling your Vacuum Cleaner
1. Connect the hose connector to the
front cover of the vacuum cleaner by
pushing it in until it clicks into place.
To release the hose connector, push
the two buttons located on the top
of the connector and pull away from
the vacuum.
2. Connect the extension pole to the
hose connector by pushing it up into
place. Use reasonable force to push
it up to ensure there is a tight seal.
3. Adjust the preferred length of the
extension pole by pressing down on
the switch. This releases the poles
and allows you to move the poles up
or down. Ensure the extension pole
clicks into place before using.
4. Connect the extension pole onto the
cleaning accessory by pushing it into
the corresponding hole. Use reason-
able force to ensure a tight seal for
vacuuming.