![background image](http://html.mh-extra.com/html/onix/cd-25/cd-25_user-manual_1636188006.webp)
Mechanical section: Philips SAA 7824 Slot-in, laser SANYO DV 34.
Converter: DAC PCM 1796 24Bit/192 KHz Burr Brown, 4 x NE5534 and 1 x NE5532, Op Amps used for I/V conversion.
Power supply: R-CORE “high grade silicon steel core” transformer made to specifications Onix.
Components:
Specifications
Warranty
For warranty information, please contact your local ONIX distributor. Your purchase receipt is your permanent record
of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when
corresponding with ONIX. When seeking warranty service, it is responsibility of the consumer to establish proof and
date of purchase. Your purchase receipt or invoice is adequate for such proof.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Every specification and design of the product is subject to change without prior notice
This product complies with the Low Voltage Directive
(73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
OUTPUT LEVEL
2.0V (RCA) - 4.0V (XLR)
FREQUENCY RESPONSE
10Hz~20KHz (-0,5 dB)
110dB
SIGNAL/NOISE RATIO
0,002% a 1KHz
105 dB
>96 dB
DIMENSION
W 215 x D 363 x H 102 mm.
WEIGHT
4,3 Kg.
POWER CONSUMPTION
10 W
THD
DYNAMIC RANGE
CROSSTALK
6