Thank you for purchasing ONIX Electronics. With sincere appreciation, we suggest that you should read this User’s
Manual thoroughly before operation and keep the Manual properly for further reference. .
USER'S GUIDE
INSTALLATION
CONNECTIONS
Install the unit in a well ventilated place and not
exposed to high temperatures or humidity, nor any heat
sources such as heaters or radiators. Be sure to leave
space around the unit for ventilation to improve heat
radiation (at least 30 cm at top, 10 cm at rear, and 20 cm
at each side). If not enough space is provided between the
unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions.
Before making or changing the connections, switch off the power switch to prevent damaging the product.
Connect the white plug 3 to the L (left) channel 1,
and the red plug 4 to the R (right) channel 2.
Be sure to push the plugs securely.
The CD player is equipped with filters for the suppression of radio interference in accordance with EEC regulation
MAINTENANCE OF EXTERNAL SURFACES
Remove dust and dirt with a clean, dry cloth.
Never use solvents, gasoline, insecticide sprays and other
chemicals on or near the equipment because they can
corrode the surfaces.
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short circuit
or electric shock.
POWER-CORD CAUTION
3
COMPACT DISC PLAYER
CD10
POWER
ON
OFF
S E A R C H /S K IP
OPEN/CLOSE
STOP
PLAY/PAUSE
CONNECTING THE PIN-RCA CORDS
L
R
1
Left channel
2
Right channel
4
Red plug
3
White plug
1. Disc loading area
2. Screen
3. Remote receiving window
4. Load/eject button
5. Play/pause button
6. Stop button
7. Fast rewind/Previous button
8. Fast forward/Next button
9. Power switch
