manualshive.com logo in svg

Onix AUHR-014, Instruction Manual

Share
Download
Onix AUHR-014 Instruction Manual Download Page 21

21

1300 886 649

   Model: AUHR-014 Product Code: 49203  03/2015

www.tempo.org

AUS

Instructions (Cont.)

Roger Beep Tone Setting

The radio is equipped with a user-selectable Roger Beep Tone 
feature, which enables you to send a Beep Tone at the end of each 
transmission after every release of the PTT button. This will prompt 
any receiving unit that your transmission has ended. 
To enable or disable this function:
•  Press the MENU button 

nine times

, until the Roger Beep icon 

and the ON or OFF indicators start flashing on the LCD.

•  Press the CH UP or CH DOWN buttons to set the desired 

selection to ON (Roger Beep tone enabled) or OFF (Roger Beep 
tone disabled). If the Roger Beep function is enabled, a beep 
tone is heard to confirm the selection.

•  To confirm the selection and exit the Menu mode, press the 

LOCK or MENU button to move to the next function.

•  When the Roger Beep tone is enabled, the tone icon appears on 

the LCD.

Keypad Program Tone Setting

When a key is pressed, a beep tone is emitted to confirm your 
command. You can enable or disable this keypad program tone.
•  Press the MENU button

 10 times

, until the keypad tone icon 

and the ON and OFF indicators start flashing on the LCD.

•  Press the CH UP or CH DOWN buttons to set the desired 

selection ON (keypad tone enabled) or OFF (keypad tone 
disabled). If the keypad tone is enabled, a beep tone is heard to 
confirm the selection.

•  To confirm the selection and exit the Menu mode, press the 

LOCK or MENU button to move to the next function.

•  When the keypad tone is enabled, the tone icon appears on the 

LCD.

Summary of Contents for AUHR-014





























Reviews:

No comments

Brands by name

Popular brands

Load more brands