8
1300 886 649
Model: AMP2-014 Product Code: 48294 01/2015
www.tempo.org
AFTER SALES SUPPORT
AUS
Getting Started
Before first use
• Unpack the product but keep all packaging materials until you have
made sure your new mobile phone is undamaged and in good working
order. Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach.
• Unwind the charger cable to its full length and inspect it for damage. Do
not use the charger if it or the cable are damaged. In case of damage,
contact our after sales support line for advice on examination, repair or
return of the damaged product
• Read this manual to familiarise yourself with all the features and operating
principles of your new mobile phone. Pay particular attention to the safety
instructions on the previous pages.
Inserting the SIM card(s) and battery
• To open the back of the phone, gently slide the back cover down, pushing
with your thumb, then remove the cover.
• If the battery is in place (see page 7 for location), remove it.
• Insert your SIM card(s) and micro SD card in the dedicated space(s)
underneath the battery (see page 7).
• Once the memory cards are securely in place, insert the battery (supplied)
into the phone, making sure to align the pins with the contacts.
• Reinstall the back cover. It will lock into place.
Charging the battery
The battery has been partially charged at the factory. To perform all functions,
we recommend you fully recharge it as follows:
• Connect the battery charger to the mobile phone.
• Insert the plug of the battery charger into an electrical outlet and switch on
power to the outlet.
• When the phone indicates a full charge (the battery status icon is located
in the top right corner of the display), switch off power to the charger
and disconnect the charger from the power point and the cable from the
device.
Follow the above charging procedure whenever your device indicates a low
battery charge.
