6
Specifications
OUTPUT POWER
2 x 55W RMS (8 Ohm) - 2 x 100W RMS (4 Ohm)
FREQUENCY RESPONSE
10 Hz - 30kHz (-0,5 dB)
INPUT SENSIBILITY
350mV/47Kohm
SIGNAL/NOISE RATIO
>88dB (A weighted)
CHANNEL SEPARATION
> 51dB
THD
0,005% (3W/8Ohm)
DIMENSION
L 430 x P 372 x A 91 mm.
WEIGHT
8,7 Kg.
POWER CONSUMPTION
<300 W
POWER SUPPLY
220V - 240V AC
RECOMMENDED PHONO DETECTOR
Warranty
Every specification and design of the product is subject to change without prior notice
This product complies with the Low Voltage Directive (73/23/EEC), EMC
Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).
For warranty information, please contact your local ONIX distributor. Your purchase receipt is your permanent record
of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when
corresponding with ONIX. When seeking warranty service, it is responsibility of the consumer to establish proof and
date of purchase. Your purchase receipt or invoice is adequate for such proof.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Phono stage MM (Magnete Mobile):
GAIN
FREQUENCY RESPONSE
SIGNAL/NOISE RATIO
THD
RIAA DEVIATION
OUTPUT
OUTPUT IMPEDANCE
SENSITIVITY IMPEDANCE
OVERLOAD
37 db
20Hz - 20kHz +/-0,25dB
83 dB
<0,03%
+/- 0,5%
250 mV
100 Ohm
3,5 mV / 47K Ohm / 220Pf
22 dB
da 2,5 mV a 5 mV di uscita