Onion OM2S-DK-EM, Getting Started, Page: 15 / 18

5.1.4 Rebooting the Omega2S
● There are two ways to initiate a reboot of the Omega2S:
○ Software: ​ From your terminal screen, run the ​
reboot
​ command
○ Hardware:
​
Perform a quick press and release of the WPS Reset push-button
● To learn more, please read our documentation on ​ rebooting your Omega
5.1.5 Factory Reset
The Omega2S can be restored to a “factory” state in case of data corruption or lost
configuration files. Performing a Factory Restore on the Omega will revert all files to the default
for the currently installed firmware,
​ all other files will be deleted.
There are two ways to perform this operation:
● Hardware:
○ Locate the `WPS Reset` push button on the Dev Kit.
○ Press and hold the reset button for about 10 seconds. It will trigger a factory
reset.
■ LED218 will start blinking and after your release the button it will start
actual process.
● To learn more and to see how to initiate a factory reset from the command line, refer to
our documentation on ​ factory reset
Onion Omega2S Development Kit
15