Onida INV18SMT-S7 User Manual Download Page 17

25

24

M/S.  MIRC  ELECTRONICS  LTD,  WARRANTS  THIS  ONIDA  AIR  CONDITIONER[(except  the  front  grill, 
knobs,  remote  unit  and  add-on  plastic  parts)  TO  THE  ORIGINAL  PURCHASER  TO  BE  FREE  FROM 
DEFECTS IN MATERIALS AND WORKMANSHIP WITHIN ONE YEAR FROM THE DATE OF PURCHASE 
AS PROVIDED IN THE WARRANTY REGISTERATION CARD. 

WARRANTY FOR COMPRESSOR:

MIRC  ELCTRONICS  LTD,  HEREAFTER    WARRANTS  TO  THE    PURCHASER    OF  THIS  ONIDA  AIR 
CONDITIONER THAT  FOR A PERIOD OF SIXTY MONTHS FROM THE DATE OF INVOICE .

WE WILL REPAIR/REPLACE THE COMPRESSOR  WHICH PROVES UPON INSPECTION BY US OR ANY 
OF  OUR  AUTHORISED  SALES  DEALERS  TO  HAVE  BEEN  DEFECTIVE  DUE  TO  MANUFACTURING 
DEFECT.  

 This warranty is subject to terms and conditions as mentioned below:

1.

This warranty shall be valid only for the said period of 12 months as specified above, irrespective of 
whether the said unit has been in use or not for any reason whatsoever, or the unit is moved from one 
location to another. Warranty does not cover accessories external to the equipment.

2.

The warranty period specified above shall include time taken for repairs, replacements, break-downs, 
transit time etc. No notice of expiry period of warranty will be given by the company.

3.

This  warranty  shall  stand  automatically  terminated  in  the  event  of  the  said  unit  being  serviced, 
repaired, installed, de-installed, re-installed or otherwise attended to by any person or organization or 
agency or by the said purchaser himself other than the authorized representative of the company.

4.

Parts of the unit replaced or repaired under the terms of this warranty are warranted only for the 
remaining period of the original warranty period.

5.

For attending any service call under this warranty beyond the municipal limits of the locality in which 
the authorized representative/dealer is situated (outstation locations), all to and fro travelling and 
other incidental expenses as prevailing from time to time incurred in connection with the visit of the 
service personnel, technicians, etc shall be borne by the said purchaser and shall be payable in 
advance. Additionally, all expenses incurred by the authorized representative /dealer in collecting the 
said unit or any part thereof from such outstation locations and its return to the original location shall 
be borne by the said purchaser.

6.

Any  loss  of  refrigerant  caused  due  to  sabotage,  improper  handling  or  treatment  ,  carelessness, 
accident, fire, flood earthquake or any natural calamity any corrosive action on the original refrigerant 
pipes, fittings, valves etc for whatever reasons, shall not be covered under this warranty.

7.

In the event of any change in the location of the unit during the warranty period, this warranty shall 
become null and void unless the fact of the proposed change is communicated in writing to the 
authorized dealer at least seven (7) days prior to the said change. On receipt of such information the 
authorized  dealer  or  any  of  its  counterparts  shall  arrange  for  de-installation  of  the  said  unit  on 
chargeable basis. However, in the event of any damage occuring to the unit or to any of its parts during 
the course of its transit by the said purchaser, repair or replacement, the said unit or any part thereof 
damaged shall not be covered by this warranty.

WARRANTY TERMS

 AND CONDITIONS

Summary of Contents for INV18SMT-S7






















Reviews: