EN
ONGO®stool and sensor preparation
The sensor is mounted under the seat. To install, set the ONGO®stool upside
down, pull off the foil on the metal triangle, but do not remove the metal
triangle from the housing, see Fig. 1
Attach the ONGO®sensor
Clean application area under the seat and place the ONGO®sensor together
with the metal triangle onto the surface. Position the sensor so that it is
about 5 mm from the center column and place it so that the switch and
charging socket face outward, see Fig. 2
Removing the ONGO®sensor for charging
The magnet holder allows the sensor to be easily removed from the metal
triangle. The metal triangle remains on the surface, see Fig. 3. Secure the
metal triangle by pressing it down firmly with your thumb, see Fig. 4. The
ONGO®sensor can be charged on a mobile AC power adapter or USB port
of a computer for 8 hours with the supplied USB cable.
3
4
