7
INSTALLATION STEPS
Product appearance may vary from image shown.
STEP 1:
Fix the bracket on the lamp with the combination screw.
(as shown in the image)
STEP 2:
According to the spacing (see the “A” part of the picture)
of four holes on the lamp brackets, drill four mounting
holes. (as shown in the image)
STEP 3:
Put the brackets onto the prepared mounting holes and
then screw them on.
STEP 4:
Adjust the beam direction as you like, and then plug into
the main socket.
NOTE:
Recommended installation height not higher than 5 m (16.4 ft).
Step 1
A
Step 2
Step 3
Step 4
A
D
B
C