WARNING: INSTALLING THIS LIGHT IN AN UNGROUNDED
ELECTRICAL SYSTEM MAY CAUSE THE METAL PARTS OF
THE LIGHT TO CARRY CURRENT IF ANY WIRES OR WIRE
CONNECTIONS ARE DAMAGED OR LOOSE. IN THIS CASE,
ANYONE WHO TOUCHES THE LIGHT WILL RECEIVE AN
ELECTRIC SHOCK, RESULTING IN INJURY OR DEATH.
BE CAREFUL NOT TO DAMAGE OR CUT THE WIRE
INSULATION (COVERING) DURING INSTALLATION. DO NOT
LET THE WIRES TOUCH ANY SHARP EDGES.
10
INSTALLATION STEPS
Product appearance may vary from image shown.
Step 1
A
Step 2
Step 3
Step 4
Step 1: Fix the bracket on the lamp with the combination screw. (as shown in the image)
Step 2: According to the spacing (see the “A” part of the picture) of four holes on the
lamp brackets, drill four mounting holes. (as shown in the image)
Step 3: Put the brackets onto the prepared mounting holes and then screw them on.
Step 4: Adjust the beam direction as you like, and then plug into the main socket.
NOTE: Recommended installation height not higher than 5 m (16.4 ft).
A
D
B
C