Onfloor PRO SERIES 16, Safety, Operation Manual & Parts List

Page: 4 / 16

P
AGE
4
DO NOT attempt to operate this unit if the machine is not fully assembled.
When servicing or replacing accessories turn OFF the machine and
disconnect from the power source.
Prior to operating the machine, tilt machine back on transport wheels,
turn ON the machine and carefully lower the machine onto the working surface.
CAUTION:
1) Clear the floor of any materials or objects.
2) Select and install the accessory set required for the
job. (See above for installation instructions.)
3) Move handle from the upright “storage” position to
the angled “operating” position and lock in place with
the quick release pin.
4) Place your hands on the handle grips tilt sander
back on the transport wheels.
5) Push ON/OFF switch to the ‘ON’ position.
6) When the machine is running, carefully lower it
onto the working surface and release the trigger lock.
7) Push ON/OFF switch to ‘OFF’. Speed of the motor
can be controlled using the speed control knob.
8) Move the machine side-to-side while maintaining a
steady, consistent pace with the machine.
9) When not in use, a set of attachments MUST be left
on the sander to protect the heads.
Note: If the machine unexpectedly shuts down due to
a circuit overload, before restarting wait 2 minutes,
then reset the circuit breaker.
O
PERATING
I
NSTRUCTIONS
W
ARRANTY
I
NFORMATION
We guarantee to the original purchaser this
floor machine against defects in material and
workmanship for a period of 1 year from the
date of delivery. Please note the following
conditions pertaining to this warranty.
1)
This warranty does not apply to any repair
arising by reason of misuse, neglect, or abuse,
or to proprietary parts.
2)
Applies only to the original owner and is not
transferable.
3)
Machine will not have been dismantled or
tampered with in any way.
4)
Covered components proven defective will
be repaired or replaced at no charge. Covered
components include motors, bearings, belts
and switches.
5)
This Warranty is in lieu of and excludes every
condition or warranty not herein expressly
set out and all liability for any form of
consequential loss or damage is hereby
expressly excluded.
6)
This Warranty is limited to repair or
replacement of covered components and
reasonable labor expenses.