W
ARRANTY
P
P
A
AG
GE
E
8
8
PN 467731 OF16-2V - Printed in USA 04/18/08
T
ROUBLE
S
HOOTING
G
UIDE
PROBLEM: Motor will not run.
Possible Cause
Possible Solution
1
1)) Defective switch.
1
1)) Check switch, replace if defective.
2
2)) Defective power cord or wiring.
2
2)) Check and replace if defective.
3
3)) Defective motor.
3
3)) Have motor checked by an authorized service center.
4
4)) Blown fuse or tripped circuit breaker at wall panel.
4
4)) Replace fuse or reset circuit breaker. If this doesn't correct the
problem, have the sander checked by an authorized service center.
5
5)) Power cord not plugged in properly or damaged.
5
5)) Plug in power cord properly or replace power cord if damaged.
PROBLEM: Machine bogs down and runs slow.
Possible Cause
Possible Solution
1
1)) Defective capacitor or switch.
1
1)) Have machine checked by an authorized service center.
2
2)) Circuit may be overloaded with more than one appliance.
2
2)) Plug floor machine into a dedicated power outlet.If the problem still
exists there could be a short.Have the floor machine checked by an
authorized service center.
3
3)) Low line voltage in building.
3
3)) If wiring is old in the building have the power company check the voltage.
PROBLEM: Motor runs, driver will not rotate.
Possible Cause
Possible Solution
1
1)) Belts are broken.
1
1)) Contact the manufacturer or authorized service center.
PROBLEM: Noisy machine or vibration.
Possible Cause
Possible Solution
1
1)) Defective motor.
1
1)) Contact the manufacturer or authorized service center.
2
2)) Attachment is not level or securely attached.
2
2)) Level attachment and make sure all fasteners are secure.
This machine is warrantied against
defects in material and workmanship for 1
year, except for normal wear items listed
below, from the date of delivery to the
original purchaser. The warranty period is
subject to the conditions below:
Normal Wear Item
Warranted Up to 90 Days:
Normal wear items will be warranted from
manufacturing defects from date of pur-
chase including but not limited to the fol-
lowing items:
Accessories; Attachments; Belts;
Bearings; Casters; Electric Cords;
Finishes; Filters; Pad Holder;
Switches; and the like.
Warranty is NULL and VOID for the
following:
1)
Damage, defects, malfunctions or other
failures caused by not using the electric
current indicated on the spec plate.
2)
Damage or defect caused by accident;
misuse; neglect; abuse; fire; etc.
4)
Failure due to lack of proper mainte-
nance and care (including cleaning).
5)
Any unauthorized design alterations,
adjustments and/or repairs performed on
this machine.
6)
Use of parts not approved by the
machines manufacturer will void all war-
ranties.
7)
Damage in transit.
Stated Warranties
This Warranty is in lieu of and excludes all
other warranties expressed or implied. Any
statutory implied warranties, including the
warranty of merchantability or fitness for a
particular purpose, are expressly excluded.
We will not be liable for any other damage
including but not limited to indirect or spe-
cial consequential damages arising out of
or in connection with the furnishing, per-
formance, use or inability to use the
machine. This remedy shall be the exclu-
sive remedy of the buyer. The warranty is
limited to the warranty.
Warranty Claim Procedure
If a difficulty develops during the warranty
period, contact the authorized distributor
form whom the unit was purchased. The
Warrantor may elect to require the return
of the machine or components to validate
the claim. any defective part to be
returned must be properly packed and
shipped freight pre-paid to an Authorized
Distributor/Service Center.
Note:
Because this machine is intended
for commercial and/or industrial use the
warranty is limited and not applicable to
persons purchasing or using this equip-
ment for personal, family or household use
in which case the 90 day rule applies.