
5 9
LIGHTBAR COLOR
# OF BLINKS
DESCRIPTION
03
Overcharged
04
Invalid power-up orientation
06
Motor stall detected
07
Out of range controller temperature
09
Bad accelerometer
10
Bad controller
11
Bad hall sensors
13, 14
Over-current detected
15
Footpad sensor pressed on power-up
16,22
Invalid hardware
17
Out of range battery temperature
18
Out of range motor temperature
21
Charger connected
The different blink codes, differentiated by the
number of blinks in a row, may indicate different
issues with your Onewheel Pint. The entire Lightbar
will blink yellow or red. If you are riding the board
when an error code occurs the board will give
extreme push back. Lean back to slow down, stop
and dismount immediately.
Always count the error code if one occurs. Sometimes
you can solve the issue by charging the battery or by
switching your Onewheel Pint OFF and then ON again.
If you are still experiencing problems, please contact
Onewheel customer support at 1-800- 283-7943 or
send an email to [email protected]
DECODING YOUR ONEWHEEL PINT
BLINKING YELLOW
A minor issue that may be fixed by
charging or switching your board
off and on again.
BLINKING RED
An issue that may require you to
contact customer support.
G E T T I N G T O K N O W Y O U R O N E W H E E L P I N T
Summary of Contents for pint
Page 1: ...O W N E R S M A N U A L ...