OneTouch VERIO SYNC, Owner'S Booklet

Page: 57 / 116

55
Taking a test 2
Testing with control solution
OneTouch® Verio® Control Solution is used to check that
the meter and test strips are working together properly
and that you are performing the test correctly. (Control
solution is available separately.)
NOTE:
• Use only OneTouch® Verio® Control Solution, OneTouch®
Verio® Level 3 or OneTouch® Verio® Level 4, with your
OneTouch® Verio®Sync Meter. Either level can be used to
check your system.
• When you first open a new vial of control solution,
record the discard date on the vial label. Refer to the
control solution insert or vial label for instructions on
determining the discard date.
• Tightly close the cap on the control solution vial
immediately after use to avoid contamination or damage.
• Control solution test results will not be sent to the app.