5 of 6
ASSEMBLY INSTRUCTION (50-SH0105)
STEP 4
End Boards (A) and mark the wall behind. Using a drill or a hammer and a nail, make holes in the wall
where you have marked. Make sure the drill bit or nail that you use is smaller in diameter than the
Wall Anchors (3). Insert the Wall Anchors, using a rubber hammer if needed.
Align the shelf with the Anchors. Insert two Screws (2) through the holes of the End Boards and screw them
into the Anchors.
#2 x 2 Pcs
#3 x 2 Pcs
#3
#2
A
