6
Experiment with the mode selector in each position to find a tone to your taste. Bear in mind that different
pickups will respond in different ways in each mode setting.
When placing the pedal in a fixed position, you will get a boost in a particular frequency. You can use that to add
sustain and create a feedback of a particular overtone.
Tip:
To avoid unexpected mechanical “pops” when changing modes, switch the pedal to BYPASS position.
Try also connecting your wah wah pedal after your effect pedals. The wah wah effect sounds different when used
after distortions and overdrives, compared with when it is used before them.
These connections won't cause any damage to your equipment, so don't be afraid and experiment!
To turn the wah wah effect ON, push the toe of the pedal all of the way down until your hear or feel a click.
A wah wah effect is an active sweepable bandpass filter.
With the heel down, low frequencies will be more accentuated. With the toe down, high frequencies will be more
accentuated.
To turn your wah wah pedal OFF, just push the toe of the pedal all of the way down until you hear or feel a little
click. This indicates that now you are working in bypass mode.
