www.oneremote.dk
Page 7
Programme Stepping, Up/ Down Manoeuvring in Menus.
when Beo4 is
NOT
in mode 1 or 3 (Navi)
Most set top boxes and TVs have 4 arrow keys for manoeuvring in onscreen menus, up, down, left and right. In addition
to these keys they are also equipped with separate programme stepping keys for zapping through the programmes.
Often these keys are named P+, P, CH+ or CH. This is also the case for a Panasonic TV.
OneRemote convertes often use the
R
and the
W
keys for programme zapping. This way the four up, down,
left and right keys are free for manoeuvring in onscreen menus.
Setting the Zap Mode Option
when Beo4 is
NOT
in mode 1 or 3 (Navi)
If the OneRemote converter is installed in a Beo4 with a
O
key, the keys
W
and
R
are used for programme
stepping. The
D
and
F
keys are used to manoeuvre up and down in on-screen menus.
This is the default factory setting, as described above.
If you prefer this control layout changed enter the options listed below.
Selecting the Zap Mode Keys:
Enter one of these 2 option sequences within 10 seconds to set the preferred Programme Zap mode keys.
mq90
w
The
D
and
F
keys are used for
programme zapping.
mq91
w
The
W
&
R
keys are used for
programme zapping.
