www.oneremote.dk
11
INSTALLATION
The OneRemote PowerLink Switch, is easily installed.
1.
Connect the speakers with PowerLink cable(s).
Not included.
2.
Connect the two sound sources with appropriate cables.
Not included.
3.
Connect the mains adaptor.
CABLE QUALITY
Make sure to use good quality PowerLink cables, preferably double-shielded types, especially if
long cables are used. Do not use un-shielded cables for any connection.
PowerLink MKII with 4-wire mounted is not recommended.
When connection to PowerLink sources, there is no need for further programming. The
PowerLink switch is factory programmed in the
Priority Switching Mode.
