3
Operation & Installation
Operation-RFID
Installation-Relay
Installation-Acc Detecting
Installation-Car Door Detecting
ONER GPS Vehicle Tracker
User Manual
5
Operation-RFID
1) Connect RFID to tracker, insert SIM card,
connect GSM/GPS antennas and external power
switch on the tracker;
2)Send follows commands to active RFID mode,
enter IC card setting mode
W000000,BTL
W00000,RFID,1
W00000,ICSET,1
When LED light of RFID is stand by, enter IC card setting mode
3)Swipe IC Card to store ID number to device
if RFID make a long sound “ di ”, mean
storing ID number to device successed.
If RFID makes sound like“ di di di”,
it means setting failed, please try again.
4) after storing all IDs, please send command
”W000000,ICSET,0”to leave IC card setting
mode, and then you can start to use RFID.
5) Driver swipes IC card and starts the car at workint time, driver info will be sent to tracking
system as well as location info, and these info will be shown in the driver report; What if driver
starts the car at non working time, illegal driving will be shown in the report, which can be a
prove to driver using car for private purpose, it can help to reduce doing private jobs .
IC