4
5
rotate the mounting bracket on the alarm, the alarm is activated
and cannot be turned off without permanently disabling the
alarm. You can remove the bracket for installation. The alarm
remains activated and paired. Therefore it is best to install alarms
shortly after being activated and as close as possible to the
time the homeowner will occupy the home so the end user has
maximum longevity and use of their alarm.
How to Pair Alarms
1. Download the free App onto
your iOS device from the App
Store. Search for “Onelink
Home by First Alert”. Installers
only need one App to set up
multiple homes or apartments.
See image at right.
2. Open App and follow instructions
for setting up and pairing devices. You need to choose
whether you are setting up the hardwired AC10-500 or the
battery powered DC10-500 version on the App. For installers
who are setting up multiple devices in multiple homes you
need to assign a name to each home in the App and then pair
the alarms to that home (maximum of 10 homes). This will
keep alarms separate from other homes you set up. See App
screens shown for an example of what this might look like.
3. Each alarm has a unique
8 digit alphanumeric
product code that is shown
on the side of the alarm
underneath the QR code. It
will be similar to the label
shown at the right.
Carrier
100%
11:27 AM
123 Main Street
10547 Elm Street
125 Main Street
10552 Elm Street
Carrier
100%
11:27 AM
123 Main Street
Master Bedroom
Hallway
Basement
Pull down to update accessory list
Multiple Homes Setup
Multiple Alarms per Home
Choose Alarm Type
AC10-A9CC
XXX-XX-XXX
Onelink App Download
Onelink App Screens
