Standard Features at a Glance
• Optional cradle support for hand-held computers provides on the spot
printing of reports, invoices and receipts.
• Rugged, steel printer frame and vibration isolation bracket for
maximum performance in the toughest conditions.
• Easy-to-load/unload paper reduces driver training
and enhances reliability.
• Runs off a vehicle’s 12-volt power system and requires no
expensive voltage adapters.
• Easily mounts wherever needed – from bulkhead/wall
to the dashboard/console.
• Programmable sleep mode to extend vehicle battery life.
• Printer fonts and operating system stored in Flash memory so the
printer can be upgraded right in the office.
User Environment
Operating Temperature
-4° F to 122° F (-20° C to 50° C)
Storage Temperature
-40° F to 158° F (-40° C to 70° C)
Relative Humidity
10% to 90% non-condensing
ESD Protection
8 kV Air, 4 kV Contact
Communications
Serial
RS-232, up to 115.2k baud with built-in serial cable to
standard cradles
Bluetooth
®
Network Environment
Ad hoc environment
Protocol
v1.2 (compatible with v1.1 devices)
Print Technology
Printhead
9 pin impact
Printhead Life
100 million dots
Print Speed
270 characters per second
Ribbon Cartridge
2,000,000 characters
Options / Accessories
• Cradle Bracket for Dash-Mount
• Dash-Mount Bracket
• Fuse Box Power Cable Kit
• Paper Tray
• Power Adapter Cable
• Power Extension Kit
• Ribbon
• Horizontal Vibration Bracket Kit
• Wall-Mount Vibration Bracket Kit
Media
Type
NCR, Plain (up to 4-ply)
Width
3" minimum, 8.5"/ A4 maximum
Capacity
Up to 200 sheets
Fonts & Languages
Memory Capacity
Flash/RAM Memory
:
1024kB/512kB
Standard Fonts
10 CPI Pica/Elite & 12 CPI Pica/Elite
(additional fonts available)
International Characters
Arab-T, Arab-S, Arab-E, Cyrillic (Cy110 & CY210),
Greek (GRDOS & GRWIN), Hebrew (HB110, HB210, HB310)
& Latin (additional international characters available)
Graphics
Supports transient “print once” graphics
Agency Approvals
FCC B, CE, UL/cUL
Warranty
1 year (including printer case and printhead*)
Specification Highlights
VMP
™
Vehicle Mount Printer
™
email:
WWW.ONEILPRINTERS.COM
*When used with approved ribbon.
VMP
™
and Vehicle Mount Printer
™
are trademarks of O’Neil Product Development, Inc.
Specifications are subject to change without notice. All product and company names are
trademarks, service marks or registered trademarks of their respective owners.
Copyright 2007, O’Neil Product Development, Inc.
rev. 7/07 Made in the U.S.A.
Physical Characteristics
VMP
™
2000 Serial
VMP
™
2000, Bluetooth
®
Dimensions
15.75" x 4.75" x 4.0625"
15.75" x 4.75" x 4.0625"
(400 x 120.65 x 103.19 mm)
(400 x 120.65 x 103.19 mm)
Weight (printer only)
115.7 oz (3.280 kg)
114.7 oz (3.252 kg)
VMP
World Headquarters
O‘Neil Product Development
8 Mason, Irvine, CA 92618-2705
Ph: 949.458.0500
Fx: 949.458.0708
