Oneil microFlash2, Programming Reference Manual

Page: 49 / 69

Chapter 4: Querying the Printer
48
O’Neil Programming Language Reference Manual
Configuration Reply Explanation
Query Reply Definition
A Y,N Auto White Space Advance
L LP, EZ Default mode = Line Printer (ESC) or Easy Print (EZ),
The following are available for radio ready 2t/3l/4t printers:
EMC1 (Custom 1), EMC2 (Custom 2), EMC3 (Custom 3),
EMP1 (PGL), EMZ1 (CP CL), EMZ2 (Cog),EMZ3 (ZPL).
B 012 (mf2/3),
024,048 (mf2/3),
096,192 (mf2/3),
384,576,115
Baud rate = 1200,2400, 4800, 9600, 19.2K, 38.4K, 57.6K,
115.2 k baud
P N,E,O Parity = None, Even, or Odd
N 7,8 Number of data bits = seven or eight
H N,H,S,B Handshaking = None(N), Hardware (H), Software (S), or
Both Software and Hardware (B)
J Y/N EZ Print Job Status Report. Yes (Y) or No (No).
D -25%
...+35%
Darkness = -25%, -20%, -15%, -10%, -05%, +10%,
+15%, +20%, +25%, or +35%
F Y/N Form feed (act on FF) only available on radio ready 2t/3l/4t
printers. Yes (Y) or No (N).
G Y/N Beep when charger connected. Yes (Y) or No (N).
Y 1,2 Paper ply = one or two
S Y,N Beeper sound = Y (beeper on) or N (beeper off)
M Y,N Centering of printhead on form feed: Y = Printhead centers
during form feeding; N = Printhead remains where it last
stopped during form feed.
T nnnn Timeout value in seconds (9999 indicates printer never time
outs)
R nn/NEVER RF Power Timeout (only available on radio ready 2t/3l/4t
printers). nn (minutes) or NEVER timeout.
U 0 to 4 Paper out beep (only available on radio ready 2t/3l/4t
printers). 0=1 beep (not 0=5 beeps);1=one time; 2=rep
every 15s;3=rep every 30s;4=rep every 60s.
TP 0/not 0 Test print. 0=Normal;Not 0 -Special.