IV. V-Systems Fan Wheel Motor Assembly
1. Open box and unpack Motor, Mag-
netic Starter, Fan Wheel and Hardware
package. Wheel and Hardware pack-
age is packed underneath Motor. See
right.
Note that Magnetic Starter is attached
to Motor by it’s cord.
2. To easily remove Motor, cut down
the sides of outside box as shown
above.
3. Pull out cut cardboard side from
bottom of box.
4. Lift out inside cardboard retainer,
then remove rest of box.
5. Carefully cut away plastic wrap and
remove bottom board. Lift and place
motor on it’s top on solid surface as
seen below.
6. Add a bead of silicone around
bottom of motor as indicated, against
shoulder of machined ridge. Note: This
seals Motor and Fan Housing, prevent-
ing dust blow out.
V - Systems Owner’s Manual O.A.S. 2008
c
Silicone
