6 Oneida Air Systems
Assembly Instructions
13
Secure Back Support Brace (A) under both Side Brackets (B)(C) with two Bolts (D1), two Flat Washers
(D2), and two Whiz-Lock Nuts (D3)
– finger tighten only. [FIG 5] See Step 12 for alternate positions.
A
D1
D2
C
A
A
B
C
B
D3
FIG. 4a
Top View: Closest to wall position
FIG. 5
FIG. 4b
Top View: Closest to wall position
FIG. 4c
Top View: Parallel to wall position
FIG. 4d
Top View: Parallel to wall position
R
L L
C
B
12
The Back Support Brace (A) can be attached in two positions to accommodate your preferred system
orientation. To have the system closest to the wall refer to [FIG 4a] and [FIG 4b] and to have the filter or
ductwork parallel to the mounting wall refer to [FIG 4c] and [FIG 4d]. For this mounting position, the
bolts must be placed as shown in [FIG. 4e]. For additional examples of filter and inlet orientation, refer
to the beginning of your dust collector’s Assembly Instructions.
FIG. 4e
Bolt placement
shown in black
B
C
