background image

14

Dust Cobra Owner’s Manual     O.A.S. 2010

c

 

 

 

 

 

  Oneida tries to ship orders out in a timely manner, however sometimes delays and back orders are inevitable. Oneida will not be held responsible or liable for these 

conditions or the way they may effect your production. Back orders will be shipped when they are available. When orders are shipped UPS, UPS will notify you by 

e-mail. If shipped by Common Carrier, you can arrange for the trucking company to notify you and make arrangements for delivery. Shipping method is determined by 

Oneida Air Systems and is dependent upon material to be shipped and destination. You are not charged until your order is shipped.

  Please look over the shipped order very carefully in the presence of the delivery person for damage or incomplete shipment before signing the delivery receipt. Please 

note any tears or irregularities in shipping packaging, however slight, on the shipping delivery receipt. This could be an indication of extensive concealed damage. The 

shipping company will not take responsibility if the damage is not noted on the delivery receipt. In the event of shipping damage, call OAS Customer Service immediate-

ly at 1.800.732.4065 so we can expedite replacements. Please check in all parts within 3 days from receiving order. Notify OAS immediately of any missing or incorrect 

parts. OAS does not accept any claims for damage or shortage after 3 days from date of delivery.

Phone

 - 1.800.732.4065 

Toll-Free

Our hours are Monday - Friday 8:30am - 5:00pm EST

You can fax your order in anytime and we will send you 

back a confirmation by e-mail, fax or mail. Be sure to 

include your name and a daytime phone number

Fax

 - 1. 315.476.5044

You can shop on our online web store 24 hours a day. 

E-mail us at: 

[email protected].

I

nternet

 - www.oneida-air.com

Mail

 - Oneida Air Systems, Inc.  1001 W. Fayette St., Syracuse, NY 13204

You can mail in your order and we will send you back a confirmation by e-mail, fax or mail. Be sure to include your name and a daytime phone number.

Oneida Air Systems™ warrants the products manufactured by Oneida Air Systems, for a period of 1 or more years depending on the product, to the original purchaser 

from the date of purchase unless otherwise specified.  Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All electrical 

items such as magnetic starters, remotes, sensors, pumps and accessories are limited to 90 days. Oneida Air Systems warrantees that the product will be free from 

defects in materials and workmanship.  This warranty does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs, alterations, 

improper wiring or lack of maintenance. This is Oneida Air Systems sole written warranty and any and all warranties that may be implied by law, including any merchant-

ability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant or represent that the mer-

chandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Oneida Air Systems’ liability under this warranty exceed 

the purchase price paid for the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New York, County of Onondaga.

ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY OR FOR INCIDENTAL, AND CONTINGENT, 

SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCT.

Oneida Air Systems makes every effort to accurately represent our products, specifications and prices; however Oneida Air Systems 

reserves the right to make changes to products and prices at any time. As a manufacturer, Oneida Air Systems reserves the right to change 

product designs and specifications at any time.

  

Products will be shipped to Buyer’s single destination.  Title and risk of loss shall pass to the Buyer upon delivery to such destination.  Buyer pays transportation 

expenses.  Dates of shipment are advisory and Oneida Air Systems will make reasonable efforts to ship on or before the date states for shipment, however, Oneida Air 

Systems shall not incur any liability for failure to ship on that date.

 

Buyer must inform Oneida Air Systems of any shortage or damage, by so noting in writing, on the freight delivery bill prior to signing to indicate receipt of shipment.  All 

claims covered under the limited warranty, are subject to inspection and investigation by Oneida Air Systems.  Oneida Air Systems reserves the right to inspect and 

investigate all returned products before Buyer’s claim is settled.  All products returned for a refund must be unused and resalable and purchased within the last 30 days.  

There are no refunds on flex hose or custom made components.  There will be a 25% restocking fee applied to any returned items.  Buyer must call and obtain a Return 

Material Authorization Number (RMA #) prior to making a return.  All merchandise must be shipped to us prepaid.  

Terms and Conditions / Shipping

How to Order

Checking in Order

Limited Warranty

Delivery Risk of Loss

Returned Goods Policy

Summary of Contents for Dust Cobra - XCK010000
















Reviews: