19
77.5 kHz, reception area is a radius of 2000km around Mainflingen near Frankfurt am Main,
Germany
) begins 3 minutes after the established connection of indoor unit and outdoor
unit. A corresponding "radio"-icon will be displayed (flashes during connection attempt).
Manual setup (when the radio clock signal can not be found):
•
Press and hold + and - for 3 seconds to interrupt the automatic radio clock signal scan.
•
Press and hold MODE for 3 seconds to switch to setup mode. The year display starts to
flash. Adjust with the b/-. Press MODE to confirm.
•
Repeat this procedure for adjusting the
• month
• date
•
time zone (in relativity to CET. For London enter "+1", for Moskow enter "-3" etc.)
•
display language
•
12h / 24h display
• hour
• minutes
Please note:
The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.
Alarms
Set alarms
•
Press MODE to switch from time display to A1 (Alarm 1) display.
•
Press and hold MODE for 3 seconds. The alarm time is shown with the hour flashing. Adjust
the alarm hour with +/- and press MODE to confirm. Repeat the procedure for setting the
minutes and press MODE again.
•
Now the A2 (Alarm 2) display is shown. Repeat the procedure for setting alarm 2.
Please note:
The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.
Activate/deactivate alarms
•
Press MODE to switch to the A1 or A2 display and press "
-"
, to activate or deactivate the
respective alarm. An alarm clock symbol on the display indicates active alarms.
Please note:
Alarm1 is active on weekdays only; alarm2 is active on weekends only.
Please note:
The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.
Snooze
