7
Assembly
Install the base
• Take out the base/ umbrella-shaped snow contain-
er, base support, fixing screws and transformer.
• Fix the 4 base supports onto the base;
• Connect the transformer plug with the base socket;
• Unfold the umbrella-shaped snow container.
Install the Christmas tree
• Take out the Christmas tree assembly and insert
the lower part into the support of umbrella-shaped
snow container, turn the tree pipe so that both holes
are fully aligned, then fasten it with a screw.
• Fit the upper tree pipe with the lower pipe.
They must be tightly engaged, to avoid any gap,
as air leakage from it may affect snow spraying.
Unfold the branches and arrange them to get a good
shape. To get the best shape and appearance, it is
suggested to extend each branch horizontally, to
achieve good coordination between the tree profile
and the umbrella-shaped snow container
Install the top
•
Take out the top and fit it on the pipe of the tree top.
The top is designed to return the snow flakes, and
must be set square in the center, to avoid snow
flakes flying everywhere.
Decorate the Christmas tree
•
Take out the ornaments and fix them at branches.
Note: They must be properly fixed, as disengaged
ornaments may fall into the snow container to pre-
vent smooth flow of snow flakes.
• Take out the lamp string and insert the plug into the
socket in the base, and coil the string around the
tree branches properly.
