12
Manual search
•
Press SKIP+ or SKIP- button to adjust the FM frequency by steps of 0.05MHz.
Automatic Preset Memory
•
Press and hold PROG./STOP for about 2 seconds to start the automatic preset process.
•
Display will show the memory sequence number and radio stations will be automatically
preset into the sequence number (Note: Each sequence number means 1 preset station
while during automatic preset process.)
•
Once all the stations were automatic preset, press the “PROG. / STOP” button to choose.
Sleep Timer
•
1Press the „SLEEP“ button on the remote control, display will show „SL 60“. That means,
after 60 minutes, appliance will automatically turn to Standby Mode.
•
Press the „SLEEP“ button again to select the automatically turn off time, from 60, 50, 40,
30, 20, 10 minutes.
•
If want to cancel the sleep function, press the “SLEEP” button to “SL 00” to canel sleep
function.
Clock Setting
•
Press the “STANDBY” button to switch unit at standby mode.
•
Press and hold the “CLOCK SET” button to entry clock set mode. The display will show
“12H” and flashing.
•
Adjust time format ( 12H / 24H ) by pressing the “SKIP +” or “SKIP -” button.
•
Press the “CLOCK SET” button to confirm time format, display will show “PM” if 12H format
is set.
•
Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “CLOCK SET” button
to confirm.
•
Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “CLOCK SET” button
to confirm.
Notes:
Because clock setting is at standby mode, the display is dim
Setting the Alarm
ALARM setting must be after completed clock setting.
•
Press the “STANDBY” button to switch unit at standby mode.
•
Press and hold the “AL 1” or “AL 2” button ( 1 second or less ) to entry alarm set mode.
•
Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “AL 1” or “AL 2” button
to confirm.
