background image

MICROFLASH 4T PRINTER USER'S GUIDE

18

Supplies

Use only supplies certified by the Original Equipment 

Manufacturer (OEM). For OEM supplies, please contact 

O’Neil at (949) 458-0500.

Media Supplies

O'Neil Product Development, Inc. offers seven certified 

grades of paper for use in the PrintPAD series of 

printers. Our certified supplies are guaranteed 

compatible — this important qualification means that 

rigorous performance and image life testing have been 

performed. Quality supplies are key to obtaining 

optimal image quality and print performance. Quality 

supplies are also the key to extending the life of the 

printer. O'Neil Product Development strongly 

recommends using O'Neil Certified Supplies only.
For more information, contact O'Neil Printer Supplies 

Group at (949) 458-6400.

Maintenance Supplies

We recommend that you follow a regular maintenance 
schedule using our cleaning card (or cleaning kit when 

using linerless labels). O'Neil's cleaning cards are 

designed to effectively remove dirt and other 

contaminants from the thermal printhead, rollers, and 

paper path...resulting in a clean, crisp image output — 

every time. Our cleaning kits remove any adhesive 

residue (when using linerless labels) in addition to dirt 

and other contaminants.
For more information, contact O'Neil Printer Supplies 

Group at (949) 458-6400.

Summary of Contents for Microflash 4T





















Reviews: