First, be sure the headset is switched off.Then on the GPS enter the“Add Bluetooth device mode”.Once your GPS is
searching for Bluetooth® device, please press and hold the Multi-Function Button (MFB) on the helmet control unit
for approximately 6 seconds until the blue LED and red LED are flashing alternatively.
Second, select “helmet_intercom_over” from Bluetooth device list on your GPS and input password/PIN “0000” at
your GPS.
When BLINC™ headset is connected with GPS, you can hear the navigation prompts.
NOTE: When BLINC™ headset is connected with GPS, it can not be connected with your phone or other devices .If
you want to answer the dial, first you can let your phone be connected with GPS, then let GPS be connected with
BLINC™ headset, more information for this, you can refer to your GPS user manual.
