ONE80 – Installation Manual
17
5 Installation
Always unplug the power AC cable before any hardware maintenance
operation.
This chapter describes how to connect the router.
5.1 Connection
The external power supply is connected on the rear panel of the device.
The external power supply is delivered with the router package.
•
Connect the ’jack’ connector of the external power supply to the DC “12V –
1,7A” power input device connector,
•
Connect the DC input jack from the power supply to the DC “12V-1,7A” power
input on the rear panel of the router,
•
Secure the power supply connection by installing the DC power supply cord
into the plastic ring.
The device shall not be used with another power supply than a power
supply provided by OneAccess.
