A.Connect a DC 5V adaptor ,will be motion detection recording ,just use remote controller
to turn off. There is no indicator to notice when charging ,which is controlled by circuit,if
full ,will not charge anymore automatically.
Notice:The
product
support
recording
when
the
device
is
charging
by
a
DC
5v
adaptor.
Indicator:
Indicator
function
green led 1s ,red led 3s ,
turn on
Red led flash 3times quickly
turn off/no power
Greeen Light flash 3 times quickly
continuous recording
Red led 3s
PIR recording
red light flash 1 time
taking picture
Red led 3s
motion detect recording
Flashing green light unremittingly
Not insert a micrso sd card
Red /Green Flashing alternately
Not read micro sd card successfully
solid green
Standby mode
1.4 Operating instruction:
Insert micro sd card
（
class10
）
, Connect TV/Monitor to format micro sd card first.
1. press power button by remote control ,greens LED flash 1s,Red LED flash 3s,until
LED light turn off ,that mean already start motion detection recording ,press motion
button againe ,LED light will be solid green in standby, and stop recording ,and will
save file automatically.
Remark: Above turn on for unit is base on battery power supply.If by DC 5v adaptor , no need to press
power button ,once plug in power ,it will start to work in motion detection mode automaticly
2 Press “manual record” button, Greeen Light flash 3 times, then turn off to start recording.
Press video record again to stop and will save the file automatically. The device is now in
standby mode indicated by solid green LED light.
3.Press ”Photo taking” button to take photos, the red light will flash 1 time to indicate a
photo has been taken. Press one time and take a photos.
4..Press”PIR mode”, Green light flashing 3S,until light turn off ,that means start to PIR
