IPPS Intercom System
-28-
Chapter VIII Safety Instructions
In order to protect you and others from harm or your device from damage,
please use the device after reading the following information.
Do not install the device in the followin places:
Do not install the device in high-temperature and moist environment
or the area close to magnetic field, such as the electric generator,
transformer or magnet.
Do not place the device near the heating products such as electric
heater or the fluid container.
Do not place the device in the sunshine or near the heat source.
This might cause discoloration or deformation of the device.
Do not install the device in an unstable position to avoid the property
losses or personal injury caused by the falling of device.
Guard against electric shock, fire and explosion
Do not use damaged power cord, plug or loose outlet.
Do not touch the power cord with wet hands or unplug the power cord by
pulling.
Do not bend or damage the power cord.
Do not touch the device with wet hands.
Do not make the power supply slip or cause the impact.
Do not use the power supply without the manufacturer's approval.
Do not have the liquids such as water go into the device.
Clean Screen
Wipe the fingerprint and dust, etc. on the display screen with soft cloth.
Clean Device Surface
Clean the device surfaces with soft cloth dipped in some water, and then
rub the surface with dry cloth.
Other Tips
In order to prevent damage to the paint layer or the case, please do not
